Remove the termination cap outlet, connect the sewer hose (adaptor) to the termination end, place the other end into an approved dump station inlet, open the black (sewer) water termination valve first, once dumping slows down, open the gray water termination valve, once contents are dumped, close termination valves, flush sewer tank with water, open termination valves one at a time until empty, close termination valves, disconnect sewer hose and store, install termination cap, add approved chemical deodorant as per manufacturer’s instructions.
Draining My Holding Tanks Print
Modified on: Tue, 15 Feb, 2022 at 10:15 AM
Did you find it helpful? Yes No
Send feedbackSorry we couldn't be helpful. Help us improve this article with your feedback.