1. Prepare for Draining:

   • Begin by removing the termination cap from the outlet.
   • Connect your sewer hose (or adaptor) to the termination end and place the other end into an approved dump station inlet.

2. Drain the Black Water Tank (Sewer):

   • Open the black water (sewer) termination valve first.
   • Once the flow slows down, proceed to the next step.

3. Drain the Gray Water Tank:

   • Open the gray water termination valve to finish draining.

4. Flush the Tanks:

   • After both tanks are emptied, close both termination valves.
   • Flush the black water tank with fresh water to help clean the interior.
   • Open each termination valve one at a time to ensure the tanks are completely empty.

5. Finish the Process:

   • Once empty, close both termination valves again.
   • Disconnect the sewer hose and store it properly.
   • Reinstall the termination cap.

6. Add Deodorizer:

   • Finally, add an approved chemical deodorant to the black water tank according to the manufacturer’s instructions.

By following these steps, you’ll help keep your RV’s waste systems functioning properly and ensure a cleaner, more efficient process.

Remove the termination cap outlet, connect the sewer hose (adaptor) to the termination end, place the other end into an approved dump station inlet, open the black (sewer) water termination valve first, once dumping slows down, open the gray water termination valve, once contents are dumped, close termination valves, flush sewer tank with water, open termination valves one at a time until empty, close termination valves, disconnect sewer hose and store, install termination cap, add approved chemical deodorant as per manufacturer’s instructions.