The remote control for your Cirrus camper operates both the jacks and the awning. To extend or retract the awning, you’ll need to activate Awning Mode by following these steps:

  1. Set the Interior Switch – Locate the interior switch and flip it to the "Awning" position.
  2. Activate Awning Mode on the Remote – Press and hold the top middle button on the remote for approximately 5-10 seconds until the indicator light turns red.
  3. Control the Awning – Once the light is red, the remote is now in Awning Mode, allowing you to operate the awning as needed.

By ensuring the remote is in the correct mode, you’ll have seamless control over your awning for a hassle-free camping experience!

4o
The remote on the Cirrus is for the jacks and the awning. You need to put the remote in awning mode and flip the interior switch to "awning". To put the remote into awning mode you need to press and hold the button in the top middle down until that light turns red, about 5-10 seconds. Once the light is red you are in awning mode and your remote will control the awning.