Getting Started
Powering On the Remote
- Locate the Truma Aventa remote.
- Press the blue center button to turn it on.
- The display screen will show the temperature and time.
- A snowflake icon in the upper left corner indicates that it is in cooling mode.
Adjusting Modes and Fan Speed
Selecting a Mode
- Press the Mode buttonto cycle through the three modes:
- Cooling
- Auto
- Fan Only
Adjusting the Fan Speed
- Press the Fan button (fan icon) to change the speed.
- Available speeds: Low, Medium, and High.
Temperature and Time Settings
Setting the Temperature
- The temperature display is located on the screen.
- Adjust the temperature using the plus (+) and minus (-) buttons.
- The lowest possible temperature setting is 62°F.
Adjusting the Time
- Slide down the bottom part of the remote to reveal more button options.
- Use the Hours and Minutes buttons to set the time.
Using the Timer and Additional Features
Step 6: Setting the Timer
- The timer allows the air conditioner to turn on at a specific time.
- Adjust the time using the Hours and Minutes buttons.
- If you do not want a timer, press the Off button.
Night Mode
- Press the Moon icon to activate Night Mode.
- The fan will run at the lowest setting for a quieter cooling experience.
Dehumidifier Mode
- Press the Teardrop icon to activate the dehumidifier mode.
- This mode helps remove excess moisture from the air.
Remote Pairing and Reset Options
Pairing the Remote
- If the remote becomes disconnected, press the Wi-Fi icon button to re-pair it with the air conditioner.
Resetting the Remote
- Press the Wrench icon for setup during the initial pairing phase.
- To restore factory settings, press the Reset button.
Conclusion
The Truma Aventa is an efficient and user-friendly system, making it a great fit for the nuCamp Cirrus 920. It also pairs seamlessly with the Alde screen for better control.
For any questions, contact us at tech@nucamprv.com.
Video link: Tech Talk: Reviewing the Truma Aventa AC
SUPPORT ARTICLES
Find a Dealer