The Jensen radio is used in many nuCamp models, including the TAB 320, TAB 360, TAB 360 CS, TAB 400, and Cirrus 820.

Powering On the Radio

  • Press the Power Button to bring the radio out of sleep mode.

Understanding the Top Row Buttons

  • AM/FM Button – Controls the radio.
  • Bluetooth/USB Button – Controls Bluetooth and the USB port.
  • HDMI/Auxiliary Button – Controls the HDMI port and rear auxiliary input.
  • Time Button – Used to set the clock.
  • Zone 1 & Zone 2 Buttons – Toggle speakers on and off in different zones if your camper has multiple audio zones.

Adjusting Volume & Tuning Stations

  • Use the Volume Buttons (left side) to increase or decrease the volume.
  • Use the Seek Buttons (right side) to tune radio stations or skip tracks in Bluetooth mode.

Using Radio Presets & Multi-Function Buttons

  • The bottom row has radio preset buttons, some with dual functions:
  • The first preset button also serves as the Play/Pause button for Bluetooth and USB playback.

Using HDMI and USB Ports

  • HDMI Port – Passes HDMI audio/video directly to the camper’s television.
  • USB Port – Plays MP3 files from a flash drive. (Note: USB does not support phone music playback—use Bluetooth instead.)

Resetting the Radio

  • If needed, use a paperclip or pin to press the Recessed Reset Button to restore factory settings.

Connecting a Phone via Bluetooth

  1. Press the Bluetooth Button to enter Bluetooth mode.
  2. Hold the BT/USB Button to begin pairing.
  3. Open your phone’s Bluetooth settings and connect to the Jensen radio.
     

Using HDMI Input for Audio Playback

  1. Plug an HDMI device into the HDMI Port.
  2. Press the HDMI/Aux Button until "HDMI IN" appears on the screen.
  3. The audio will now play through the radio speakers.

Playing TV Audio Through the Radio (Auxiliary In Feature)

  1. Press the Menu Button on the TV.
  2. Use the Volume Buttons to navigate to the Audio Menu.
  3. Use the Channel Buttons to select TV Speaker Menu.
  4. Use the Volume Button to turn TV Speaker OFF.
  5. Press Menu again to save settings.

Setting the Clock

  1. Press and hold the Time Button.
  2. Continue pressing to cycle through options.
  3. Adjust the Hour using the Top Button.
  4. Adjust the Minutes using the Bottom Button.

Controlling Speaker Zones

  • If sound isn’t playing, ensure Zone 1 and Zone 2 are enabled.
  • Some campers only have one zone, so check settings if audio isn’t working.

Adjusting the Screen Dimmer for Nighttime

  1. Press and hold the Zone Button.
  2. Continue pressing until you see Dim Level options.
  3. Use the Seek Buttons to adjust brightness to your preferred setting.

Need Help?

If you have any questions or issues with the Jensen Radio System, feel free to contact nuCamp Tech Support at tech@nucamprv.com.

Thanks for watching!

 

Video link: Tech Talk: Jensen Radio Overview