Locating the Fuses

Fuse locations vary by nuCamp model. Use the guide below to find your fuses:

  • TAG Models: Located in the front battery tub.
  • TAB 320:
    • Base Package – Fuses are in the front battery tub.
    • Lithium Package – Fuses are under the dinette seat.
  • TAB 400:
    • Main DC breaker & solar controller fuse – Located in an exterior storage cabinet.
    • Lithium Package – Main battery fuse is under the center bed panel.
  • Cirrus 620:
    • Main DC breaker – Behind the white spring panel in the dinette.
    • Solar controller fuse – In the battery compartment under the dinette seat.
    • Lithium Package – Main battery fuse is behind the Lagoon table mount.
  • Cirrus 820:
    • Main DC breaker & solar controller fuse – Located under the bed step.
    • Lithium Package – Main battery fuse is under the dinette seating.

Inspecting the Fuse

  1. Remove the fuse from its holder.
  2. Check for visible signs of damage:
  • A gap in the wire inside the fuse indicates it is blown.
  • A dark or metallic smear also suggests the fuse is damaged.
  1. If no visible damage is found, use a fuse tester or multimeter to check for continuity.

Replacing the Fuse

  1. Use a fuse with the same value as the blown one.
  2. Insert the new fuse into the holder securely.
  3. Confirm that the fuse is seated properly to restore functionality.


Note: nuCamp RVs use standard automotive ATC blade fuses.

 

Troubleshooting & Support


If you need assistance, contact nuCamp Tech Support at tech@nucamprv.com. We hope this guide helps—safe travels!

 

Video link: Tech Talk: Changing a Fuse