The digital entry keypad on your nuCamp unit provides secure and convenient access. Follow these steps to operate and program your keypad effectively. 


Keypad Overview 


The exterior keypad has five buttons, each containing two numbers (1-9 and 0).


Inside the door, you will find: 

  • Handle 
  • Deadbolt
  • Emergency release
  • Low battery indicator light 


Finding Your Factory Code — Your factory code is printed on both the handle and the purple tag included with your unit. If you forget your PIN, you can use the factory code to unlock your unit or reset your PIN. 

Unlocking the Door — Wake up the keypad by pressing any button. The numbers will light up. Enter your code (the default factory code is 1234). 

Locking the Door — Press and hold the first two buttons until the door locks. 

Changing Your PIN — Press and hold the last button (containing 9 and 0) until you hear two beeps. Enter the factory default PIN (1234) or your current PIN. You will hear two more beeps. Enter your new PIN (e.g., 0000 for this demonstration). Re-enter the new PIN. After a three-tone beep, your new PIN is set. 


Need Assistance? 


If you have further questions, please contact us at tech@newcamprv.com.