ALDE
LK 550 Mixing Valve Technical Data Working temperature Min. +5° C/Max. +90° C (Min. 41° F/Max. 194° F) Operating temperature ...
Wed, 23 Oct, 2019 at 2:25 PM
How Often do I need to Replace the Glycol Fluid? Alde Recommends replacing the Glycol Fluid every 2 years. Glycol is an item that must be replaced be...
Fri, 27 Sep, 2019 at 12:06 PM
If you are experiencing a chemical smell from the Alde 3010/3020 Series, it is most likely due to low glycol level - you will need to refill the glycol flui...
Thu, 15 Aug, 2019 at 9:39 AM
If you are experiencing Leaking Glycol Fluid, and the Glycol Plug is still intact, it is most likely the Flow Assembly/Automatic Air Valve. First, try t...
Thu, 15 Aug, 2019 at 9:45 AM
Re-Grounding the Alde System 1. Locate the white ground wire coming from the Alde heating system that runs to the ground bar found underneath t...
Wed, 21 Aug, 2019 at 11:43 AM
How long does it take for the Alde to heat up my trailer Typically it can take 30 minutes to an hour before you will start to feel the heat and can take up...
Fri, 20 Sep, 2019 at 11:45 AM
Overheat Red Failure Red overheat fail is air bubbles in the glycol lines. The easiest way besides manual bleeding would be to raise the front or rea...
Fri, 9 Oct, 2020 at 8:11 AM
Please see the following document for tips and hints.
Wed, 17 Jun, 2020 at 10:42 AM
Cleaning Your Alde Occasionally your Alde system will need to be sanitized. Alde recommends using a product called Puriclean. http://www.hopkins-carter.com...
Thu, 24 Oct, 2019 at 9:15 AM